Adhesa Plate and Label Recognized Constructions:
The nameplate and label constructions that Adhesa Plate Mfg has recognition for under Underwriter Laboratories Marking and Labeling Systems-Component (standard UL 969) is file #: LP1964. Adhesa Plate has UL recognitions for pressure sensitive labels as follows:
1) Printed polycarbonate (Lexan) Labels, (AdhesaLex).
- Polycarbonate (Lexan) Labels: UL recognized construction AdhesaLex.
Certified thickness range from .005" and .030". Adhesa Plate is also certified to supply both 2 mil (3M467) & 5 mil (3M468) adhesives.
These surfaces have been tested and approved by Underwriters Laboratories:
Epoxy plastic, aluminum, galvanized steel, alkyd enamel, acrylic paint, polyphenylene oxide, nylon, ABS plastic, stainless steel, porcelain, polyurethane paint, polycarbonate, and polyphenylene terephthalate plastic.
Maximum temperature ranges from 80C (176F) to 60C (140F)
2) Printed polyester (AdhesaFlex-P) and vinyl (AdhesaFlex-V) labels.
- Polyester Labels: Adhesa Plate UL recognized construction AdhesaFlex-P.
Certification includes labels printed on matte silver mylar, white, and clear pressure sensitive polyester with adhesive suitable for application to smooth high surface energy materials. These labels are available with a matte or gloss polyester overlaminate.
These surfaces have been tested and approved by Underwriters Laboratories:
Aluminum, galvanized steel, acrylic paint, stainless steel, alkyd enamel, porcelain, ABS plastic, nylon, polycarbonate, polyphenylene oxide, melamine plastic, phenolic plastic, polystyrene plastic, polypropylene plastic, polyester plastic.
Maximum temperature ranges from 150C (302F) to 40C (140F). Suitable where exposed to high humidity or occassional exposure to water.
3) Printed aluminum (AdhesaFoil) labels.
- Aluminum Labels: Adhesa Plate UL recognized construction AdhesaFoil.
Certification includes labels printed on aluminum between .003" and .005" supplied with 3M467 & 3M468 adhesive.
These surfaces have been tested and approved by Underwriters Laboratories:
Aluminum, galvanized steel, stainless steel, alkyd enamel, porcelain, polyurethane paint, ABS plastic, nylon, polycarbonate plastic, and polyphenylene oxide plastic.
Maximum temperature 60C (140F). Suitable where exposed to high humidity or occassional exposure to water.
